[Solved] Grooving milling operations

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

[Solved] Grooving milling operations

Unread post by TopSolid2007 »

Hello guys...

I am developing my standard operations and I found a little problem...

We are used to design some features on the models using the grooving tool (U type) in several parts, due to facility to made a solid part using this command.

The problem is taht the TSCAM does not recognizes it automatically in the milling forms analysis... The feature is shown greyed and I am not allowed to use any process on it.

On the other hand, when I use the topological analysis bi clicking on this features, I am allowed to use the groove feature and it works fine...

Is there a way to make tTS recognizes and allow the operations of this kind of feature using the millin forms analysis?

Thanks for all help.

Anderson F. Angelucci
User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 »

Hello... Earth To Missler...

I realized several people read the messages, but only few people gives answers or suggestion...

Is any suggestion to this topic about grooving features recognition?

Thanks..
User avatar
Trusty
Private
Private
Posts: 9
Joined: Wed Jun 20, 2007 3:39 pm

Unread post by Trusty »

I think it will be available in 6.9.
User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 »

Yes... Please.

It will help my team to work faster... and cheaper

Thanks...
User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 »

[Solved]?
It is not Solved...
We dont have any notices about the 6.9 version...
User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 »

Does 6.9 version recognize the features designed using the groove function?

My reseler haven't sent the 6.9 for us until now...
TopSolid Users!!!!
Post Reply