[Solved] saving as *.dwg crashes???

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, jacs, Daniel

frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

[Solved] saving as *.dwg crashes???

Unread post by frankm »

Hi all,

new spatial translator for our 64 bit version, new problems :roll:

has anyone found a solution for saving drawings as *.dwg files, because one of our customer can read Acad files only.
It works fine with the 32 bit version, but a second installation of the 32 bit version on a 64 bit machine with a already installed 64 bit version is imposible. :shock:

greetings from germany

frank
User avatar
Bill
Master Chief
Master Chief
Posts: 115
Joined: Wed Feb 21, 2007 8:17 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 6.25
Location: Chicago
Contact:

regarding DWG crashes

Unread post by Bill »

Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Happy Designing
Bill
Technical Director
Missler Software Inc
frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Re: regarding DWG crashes

Unread post by frankm »

Bill wrote:Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed
frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Unread post by frankm »

Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
DownFloppy
Private
Private
Posts: 8
Joined: Thu Aug 16, 2007 7:43 am

Unread post by DownFloppy »

frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.
frankm
Private
Private
Posts: 8
Joined: Fri Mar 09, 2007 1:39 pm
Location: Neunkirchen/Saarland

Unread post by frankm »

DownFloppy wrote:
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

Ups, you are right, doesn`t work correctly, let´s wait for the next patch :cry:

frank
Post Reply