[Solved] saving as *.dwg crashes???

frankm · Unread post by **frankm** » Wed Sep 26, 2007 2:01 pm

Hi all,

new spatial translator for our 64 bit version, new problems

has anyone found a solution for saving drawings as *.dwg files, because one of our customer can read Acad files only.
It works fine with the 32 bit version, but a second installation of the 32 bit version on a 64 bit machine with a already installed 64 bit version is imposible.

greetings from germany

frank

Bill · Unread post by **Bill** » Tue Oct 02, 2007 9:06 pm

Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

frankm · Unread post by **frankm** » Thu Oct 04, 2007 3:13 pm

Bill wrote:Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

Both translators crashes, latest patch is installed

frankm · Unread post by **frankm** » Sat Oct 13, 2007 11:25 am

Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

Both translators crashes, latest patch is installed

Good news, patch 236 solved the problem

greets

frank

DownFloppy · Unread post by **DownFloppy** » Tue Nov 13, 2007 9:57 am

frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem

greets

frank

Not really solved (only 3D). Draft/2D is not possible.

frankm · Unread post by **frankm** » Wed Nov 21, 2007 12:19 pm

DownFloppy wrote:
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

Ups, you are right, doesn`t work correctly, letÂ´s wait for the next patch

frank