Dear All friends,
I would like to show codification edge when Multi draft nesting label as bellows:
https://imgur.com/Ammi0zd
Can I do this. Please help me.
Sinvia
How to show codification edge for multi daft nesting label
Moderators: remi77, jacs, Daniel
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to show codification edge for multi daft nesting label
It's described in TopSolid Wood Advanced v 6.16 book on page 118. Place the axes automatically.
RM
RM
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: How to show codification edge for multi daft nesting label
Dear RM,
I would like to show the edge of panel when do "Multi draft Nesting lables" same as multi draft
https://ibb.co/3W2ZwzX
I try many times but I can not.
Please show me in detail,
Thank you,
I would like to show the edge of panel when do "Multi draft Nesting lables" same as multi draft
https://ibb.co/3W2ZwzX
I try many times but I can not.
Please show me in detail,
Thank you,
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to show codification edge for multi daft nesting label
Hello
Do You have them in multi-draft mode?
And nesting labeling doesn't work?
RM
Do You have them in multi-draft mode?
And nesting labeling doesn't work?
RM
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: How to show codification edge for multi daft nesting label
Dear RM,
The codification edge is shown in multi draft. But No in Multi-draft nesting labels.
Nesting labels still works,
Can you show me your multi draft nesting labels with showing codification edge?
Sinvia.
The codification edge is shown in multi draft. But No in Multi-draft nesting labels.
Nesting labels still works,
Can you show me your multi draft nesting labels with showing codification edge?
Sinvia.
-
- Private
- Posts: 2
- Joined: Fri Jul 12, 2019 4:10 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
Re: How to show codification edge for multi daft nesting label
Hi Sinvia,
create a title block in your entire label and create 4 fields (one at left, right, top and bottom) then insert a BOM information in these fields.
Note: is it necessary to create a BOM with edges information. <WOO_ONE_EDGE_1>, <WOO_ONE_EDGE_2>, etc..
This will work, but your part definition must be the same in all your parts. Red arrow to Y- when using panel entities or edge function.
Enjoy
create a title block in your entire label and create 4 fields (one at left, right, top and bottom) then insert a BOM information in these fields.
Note: is it necessary to create a BOM with edges information. <WOO_ONE_EDGE_1>, <WOO_ONE_EDGE_2>, etc..
This will work, but your part definition must be the same in all your parts. Red arrow to Y- when using panel entities or edge function.
Enjoy