Modified

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, jacs, Daniel

User avatar
CAD_73
Second Officer Cadet
Second Officer Cadet
Posts: 207
Joined: Thu Oct 30, 2014 11:59 pm
Answers: 2
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: The Netherlands

Modified

Unread post by CAD_73 »

I'm wondering if I could change the text "Modifed" to an other name, like CNC

When drilling or sawing a part TopSolid creates the tekst (modified) on my material list.

It would be nicer if it would be possible that TopSolid automaticly add's a part type like CNC on the part :D
Last edited by CAD_73 on Fri Nov 23, 2018 8:34 pm, edited 1 time in total.
Senior Engineer 3D
Luxurious (Yacht) Interiors

My YouTube channel
User avatar
Toddsolid
Private
Private
Posts: 5
Joined: Thu May 17, 2018 12:36 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.18

Re: Modified

Unread post by Toddsolid »

(modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?
User avatar
CAD_73
Second Officer Cadet
Second Officer Cadet
Posts: 207
Joined: Thu Oct 30, 2014 11:59 pm
Answers: 2
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: The Netherlands

Re: Modified

Unread post by CAD_73 »

Toddsolid wrote: Fri Jun 22, 2018 11:03 pm (modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?
Yes that what I mean.
Senior Engineer 3D
Luxurious (Yacht) Interiors

My YouTube channel
RaudMees
Second Officer Cadet
Second Officer Cadet
Posts: 209
Joined: Wed Dec 30, 2015 11:25 am
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: Modified

Unread post by RaudMees »

Hello

I am in same situation today. Into BOM I can add TopSolid CAM information, but it doesn't work with extruded profiles. For me modified is good enough :)
I remember, some years ago I had that information in BOM, but I don't remember, what I had in BOM to call it out.

Any ideas?

RM
RaudMees
Second Officer Cadet
Second Officer Cadet
Posts: 209
Joined: Wed Dec 30, 2015 11:25 am
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: Modified

Unread post by RaudMees »

Maybe TopSolid->Comment will work. Try this. Then You will have (modified), when You use components from library and do some machinings. I changed that(modified) to Yes in top.dic file. Remember, that file will be updated with updates and You may need to make changes again.

RM
User avatar
CAD_73
Second Officer Cadet
Second Officer Cadet
Posts: 207
Joined: Thu Oct 30, 2014 11:59 pm
Answers: 2
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: The Netherlands

Re: Modified

Unread post by CAD_73 »

Works for me :lol: Thanks!
Senior Engineer 3D
Luxurious (Yacht) Interiors

My YouTube channel
Post Reply