Setup Sheet from several .cam files

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Setup Sheet from several .cam files

Unread post by TopSolid2007 »

Hi TopSolid'CAM experts.

I am trying to do a setup sheet where I could have the tables for more than one .cam files.

Example.

I have a family of parts and I would like to create only one setup sheet for all of them at same time.

Is it possible?

Hey Missler guys... Are you reading the posts here?
User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 »

An answer like

Its is impossible at this version or wait... we will try to develop something on the next versions would be appreciated...

...
User avatar
Trusty
Private
Private
Posts: 9
Joined: Wed Jun 20, 2007 3:39 pm

Sheets

Unread post by Trusty »

Hi

This is not possible at all...

There is no ways at all for the moment, and no plans to do it ... You are the first one to ask for this, and you can believe me, we have also stranges customers ... :)
Post Reply