Problems (Memory, printing)
Moderators: remi77, jacs, Daniel
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
Problems (Memory, printing)
Hi,
i have many problems with TopSolid v6.7 patch 310.
1st problem on both PCs: Randomly a get an error message from TopSolid "Nicht genügend freier Speicher" (not enough free memory) but what memory? HDD, RAM or swapfile? I save my files on my server (freespace: >100GB, gigabit ethernet) Mostly when the taskmanager shows that the swapfile is bigger then 2GB.
The 2nd problem only on my 64-bit PC: when i make a pagepreview randomly freezes TopSolid only the menubar is functionally. I can no save or close TopSolid. Who is debt? HP, Missler or MS??
My PCs:
Intel C2D 6700
4GB RAM
nv8600GT 256MB
80 GB HDD
WinXP 64-bit (with latest driver and patches)
(swapfile: 4GB)
AMD Athlon64 3500+
2GB RAM
nv7600GT 256MB
80 GB HDD
WinXP 32-bit (with latest driver and patches)
(swapfile: 4GB)
HP Designjet 800
sorry for my very bad english
i have many problems with TopSolid v6.7 patch 310.
1st problem on both PCs: Randomly a get an error message from TopSolid "Nicht genügend freier Speicher" (not enough free memory) but what memory? HDD, RAM or swapfile? I save my files on my server (freespace: >100GB, gigabit ethernet) Mostly when the taskmanager shows that the swapfile is bigger then 2GB.
The 2nd problem only on my 64-bit PC: when i make a pagepreview randomly freezes TopSolid only the menubar is functionally. I can no save or close TopSolid. Who is debt? HP, Missler or MS??
My PCs:
Intel C2D 6700
4GB RAM
nv8600GT 256MB
80 GB HDD
WinXP 64-bit (with latest driver and patches)
(swapfile: 4GB)
AMD Athlon64 3500+
2GB RAM
nv7600GT 256MB
80 GB HDD
WinXP 32-bit (with latest driver and patches)
(swapfile: 4GB)
HP Designjet 800
sorry for my very bad english
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
Need help!
Does nobody have a solution?
is someone here from Missler?
Thx for all answer
is someone here from Missler?
Thx for all answer
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
Thanks for your answer.
the memory-problem is different to the printing-problem. The memory error appears only sometimes (32-bit and 64-bit! if swapsize has more then 2GB?). The printer-problem is probably only in the case of networkprinters!
Printing -> Freezes (only menubar functions)
Memory-Error -> any function ending in Memory-Error
I hope somebody can help me and thx for all answers.
the memory-problem is different to the printing-problem. The memory error appears only sometimes (32-bit and 64-bit! if swapsize has more then 2GB?). The printer-problem is probably only in the case of networkprinters!
Printing -> Freezes (only menubar functions)
Memory-Error -> any function ending in Memory-Error
I hope somebody can help me and thx for all answers.
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
I rarely use print preview and don't remember getting any freezing...
I do recall that with a fresh install I have error messages from the print configuration. I modified my print configuration extensively to stop the errors and also to generate the output I desire.
Perhaps you'd like to try my config and see if that helps ?
I think you'll have to copy this file into C:\Missler\config\printer...... and also probably select this config thru the print dialog...
http://www.box.net/shared/iodqxov8gu
I am just guessing here... Try at your own risk
I do recall that with a fresh install I have error messages from the print configuration. I modified my print configuration extensively to stop the errors and also to generate the output I desire.
Perhaps you'd like to try my config and see if that helps ?
I think you'll have to copy this file into C:\Missler\config\printer...... and also probably select this config thru the print dialog...
http://www.box.net/shared/iodqxov8gu
I am just guessing here... Try at your own risk
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
still no solution
Hi,
the file from Top'Noob brought nothing. Every time the printer dialogue of TopSolid does not take over the paper format in the printer driver, TopSolid freezes.
Can anybody help me????????????
the file from Top'Noob brought nothing. Every time the printer dialogue of TopSolid does not take over the paper format in the printer driver, TopSolid freezes.
Can anybody help me????????????
-
- Private
- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am