Hey,
I was wondering if it is possible to name the parts when you insert the assembly. For now, I've done it manually.
But is there a way to do this automaticly when you insert the assembly? Thanks in advance.
Partnames in draft
Moderators: remi77, jacs, Daniel
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Partnames in draft
This is not exactly what you want but if you use the Catalog function with component you can control the parts in a sub-assembly better
Assembly | Define component | Define edit / save template
Assembly | Define component | Edit catalog header
Assembly | Define component | Define sub-component
Assembly | Define component | Define edit / save template
Assembly | Define component | Edit catalog header
Assembly | Define component | Define sub-component
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Partnames in draft
Can you explain what you mean? I don't quit understand you
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Partnames in draft
best explanation I cant give you videos or images cause I'm on TopSolid wood 6.15
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Partnames in draft
Todd I don't want your explanation but more from the topic starter. What does he want.
-
- Private
- Posts: 5
- Joined: Wed Jan 28, 2015 10:20 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
Re: Partnames in draft
I was wondering if it is possible to name the parts when you insert the assembly 'in draft mode'.
I forgot those last three words. Sorry...
I forgot those last three words. Sorry...
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Partnames in draft
Normaly you define the assembly in the 3d Design document there you give the parts a name.
Assembly - define parts
As you have done that you start a new draft. Here you make a new view. As it asks for the parts to project you select in the menu bar the 3d document containing the assembly to project.
Now you get your views. If you create a BOM you will have the names of the parts as defined in 3d on you draft.
Is that what you want?
Mark
Assembly - define parts
As you have done that you start a new draft. Here you make a new view. As it asks for the parts to project you select in the menu bar the 3d document containing the assembly to project.
Now you get your views. If you create a BOM you will have the names of the parts as defined in 3d on you draft.
Is that what you want?
Mark