1 in the sketch to the offset of one side how to do? without having to copy the sides!
2 holes in how to draw more holes without having to do the same with a single hole? how to copy the holes?
thanks
operation ts7
Moderators: remi77, jacs, Daniel, Bill, Romain
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
HI,
For item 1.... Just use rotative selection on the profile. This will allow you to select just the single segment instead of the entire profile. (Rotative selection = hold left mouse button down and tap the right mouse button. Then let go).
For item 2....Drag and drop is great! But you can also create a series of points in a sketch. Once you are done defining them all, be sure you are not in a function, then right mouse click and choose "Drilling group" from the contextual menu. Or go to the Drilling icon, right click on it, and you will find the drilling group icon there.
Have fun with TopSolid 7!
For item 1.... Just use rotative selection on the profile. This will allow you to select just the single segment instead of the entire profile. (Rotative selection = hold left mouse button down and tap the right mouse button. Then let go).
For item 2....Drag and drop is great! But you can also create a series of points in a sketch. Once you are done defining them all, be sure you are not in a function, then right mouse click and choose "Drilling group" from the contextual menu. Or go to the Drilling icon, right click on it, and you will find the drilling group icon there.
Have fun with TopSolid 7!
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
-
- Master Corporal
- Posts: 43
- Joined: Thu Oct 21, 2010 3:22 pm
group holes in a part and in a assembly
thanks for the replies all ok
a copy of the holes is ok when I work in a part ...!
I tried to copy the holes in an assembly ... but the drag does not work because
the whole assembly is copied and not just holes ... why?
how to make a copy of the holes when working in an assembly?
I found only the command drilling and not the group of holes
command in the drilling plan for each hole ... it takes a group of plans?
thanks
a copy of the holes is ok when I work in a part ...!
I tried to copy the holes in an assembly ... but the drag does not work because
the whole assembly is copied and not just holes ... why?
how to make a copy of the holes when working in an assembly?
I found only the command drilling and not the group of holes
command in the drilling plan for each hole ... it takes a group of plans?
thanks
-
- Master Corporal
- Posts: 43
- Joined: Thu Oct 21, 2010 3:22 pm
copy sketch
in a sketc to copy a symmetric profile parametric with respect to the original?
I tried drag and drop but the copied profile is parametric with respect to the original
when I change the size of the original profile does not change the symmetric?
the original profile to a pink color
after copying the original profile to a blue color and the copied profile to a gray color but are not parametric why?
I tried drag and drop but the copied profile is parametric with respect to the original
when I change the size of the original profile does not change the symmetric?
the original profile to a pink color
after copying the original profile to a blue color and the copied profile to a gray color but are not parametric why?
Re: group holes in a part and in a assembly
But it seems your holes are made in the part, isn't it? So you can't copy them in an assembly structure...solidsnake wrote:thanks for the replies all ok
a copy of the holes is ok when I work in a part ...!
I tried to copy the holes in an assembly ... but the drag does not work because
the whole assembly is copied and not just holes ... why?
how to make a copy of the holes when working in an assembly?
I found only the command drilling and not the group of holes
command in the drilling plan for each hole ... it takes a group of plans?
thanks