CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...
Moderators: remi77 , jacs , Daniel
corne
Unread post
by corne » Thu Oct 21, 2010 8:20 am
How do i need to postprocessing in topsollid V6.10 with 64 bit system?
I heard that this isn't work well.
And is this gona solved by Missler?
remi77
Administator
Posts: 348 Joined: Thu Feb 22, 2007 10:05 am
Contact:
Unread post
by remi77 » Thu Oct 21, 2010 9:13 am
Hi Corne,
This works fine, it's just that you can't postprocess through TopSolid application, it's not bug related.
See you,
Rémi
corne
Unread post
by corne » Thu Oct 21, 2010 9:21 am
remi77 wrote: Hi Corne,
This works fine, it's just that you can't postprocess through TopSolid application, it's not bug related.
See you,
Rémi
Why is this not gonna solved?
It is very easy to postprocess through TopSolid
remi77
Administator
Posts: 348 Joined: Thu Feb 22, 2007 10:05 am
Contact:
Unread post
by remi77 » Thu Oct 21, 2010 9:35 am
Hello,
Proprocessors are 32 bits applications, and even if a 32 bits application can run on an 64bits OS, it can't run through 64bits softwares. At least concerning TopSolid. It's technically not possible.
See you,
Rémi
Top'Noob
First Officer Cadet
Posts: 245 Joined: Fri Jun 15, 2007 3:05 pm
Unread post
by Top'Noob » Thu Oct 21, 2010 10:00 am
I have been told that this is fixed in Version 7 CAM.
remi77
Administator
Posts: 348 Joined: Thu Feb 22, 2007 10:05 am
Contact:
Unread post
by remi77 » Thu Oct 21, 2010 10:10 am
Hi,
Yes Top 'Noob, there should be a 64bits version,
See you,
Rémi
corne
Unread post
by corne » Mon Jan 17, 2011 1:49 pm
When you have 64 bit system
install the 32bit version on your system
then start the postprocessors and leave it running on the background
now you can post in TopSolid'Cam
remi77
Administator
Posts: 348 Joined: Thu Feb 22, 2007 10:05 am
Contact:
Unread post
by remi77 » Mon Jan 17, 2011 2:29 pm
Hello corne,
Yes, "outside" TopSolid 'Cam, the Pp works perfectly,
See you,
Rémi
combabois
Private
Posts: 8 Joined: Thu Feb 22, 2007 5:27 pm
Unread post
by combabois » Wed Oct 19, 2011 6:48 pm
In version 6.13 The PP will work through TopSolid application
Combawood
olaio
Second Officer Cadet
Posts: 194 Joined: Thu Mar 01, 2007 11:42 am
Answers: 2
Location: Leiria
Unread post
by olaio » Wed Oct 19, 2011 11:11 pm
ouaou!!!
it is good to know that
Olaio
necas
Private
Posts: 3 Joined: Fri Oct 21, 2011 5:49 pm
Unread post
by necas » Fri Oct 21, 2011 5:59 pm
Is this information confirmed (V6.13)?
corne
Unread post
by corne » Wed Apr 04, 2012 3:48 pm
combabois wrote: In version 6.13 The PP will work through TopSolid application
Can you already download v6.13?
jeff
Sergeant
Posts: 63 Joined: Fri Feb 23, 2007 6:15 pm
Contact:
Unread post
by jeff » Tue Apr 17, 2012 10:21 pm
Normally its best to use an FTP client like Filezilla for large files like this one, perhaps this will help