Hello,
I did my best to modify a fanuc post and managed to mill a 3d shape, use drilling cycles etc, but I just can't manage to overcome issues I run into with ARCs.
The machine is unable to calculate ARCs:
TopSolid:
---------------------------------
N4 G0 X-61.502 Y-25.5 M8
N5 G56 H6 Z10. S3000 M3
N6 Z7.
N7 Z2.
N8 G1 Z-.5 F300
N9 G17 G3 X-62.48 Z-.5 I-.489 J.076
Another software generates the code this way:
---------------------------------
N5 G0 X-24.778 Y-61.5 M8
N6 G56 H06 Z5.0 S3000 M3
N7 G1 Z-0.3 F200.0
N8 G17 G3 I-0.722 J0.0 F262.5
Does anyone have an OKUMA valid PP or can anyone see the problem here?
Thanks!
[Solved] PP for Okuma MX 55 VA / OSP7000M
Moderators: remi77, jacs, Daniel
- flavio_ruivo
- Master Corporal
- Posts: 32
- Joined: Thu Mar 01, 2007 12:09 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.6
- Location: Leiria-Portugal
- Contact:
Hi,
In this line you have one error, if you work in G17(planeXY):
N9 G17 G3 X-62.48 Z-.5 I-.489 J.076
You must have: N9 G17 G3 X-62.48 Y..... I-.489 J.076
Section in PP:
[MYDEFINE_ARC,XY+Z]
#bloc = IF,[#IS_WORK_PLANE_XY];
#bloc = SUB,[MYDEFINE_ARC,XY+Z,LOWER_180][#IS_ARC_LOWER_180];
#bloc = YES,[@#G_INTERPO][WORK_PLANE=17][CUTCOM][#GOTO_X][#GOTO_Y][#X_CENTER][#Y_CENTER][FEEDRATE];
Best Regards
Flávio Ruivo
In this line you have one error, if you work in G17(planeXY):
N9 G17 G3 X-62.48 Z-.5 I-.489 J.076
You must have: N9 G17 G3 X-62.48 Y..... I-.489 J.076
Section in PP:
[MYDEFINE_ARC,XY+Z]
#bloc = IF,[#IS_WORK_PLANE_XY];
#bloc = SUB,[MYDEFINE_ARC,XY+Z,LOWER_180][#IS_ARC_LOWER_180];
#bloc = YES,[@#G_INTERPO][WORK_PLANE=17][CUTCOM][#GOTO_X][#GOTO_Y][#X_CENTER][#Y_CENTER][FEEDRATE];
Best Regards
Flávio Ruivo