Hello all,
Is there a COMPLETE list of all keywords ?
I would LOVE to have a .pdf document to read through and select keywords from.
I know some of this is included in the help files and I am also aware that the main config file (located at C:\Missler\V67\local\englishUS\top_ex.cfg on my computer) can be a good source for keywords but neither source seems complete.
Another point I'd like to highlight is that the HTML Help does show keywords but DOES NOT allow me to copy text from it.
It would be nice to be allowed to copy from the help file and paste into the config.txt
[Solved] Config "Keywords"
Moderators: remi77, jacs, Daniel
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
[Solved] Config "Keywords"
TopSolid 2006, Design 6.7.302, Cam 6.7.302, Mold 6.7.302
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Re: Keywords
Hello,
Today the only documentation on keywords that I am aware of is in the localization folder, (that you already know of).
Perhaps, post questions for specific items that you are looking to configure.
Today the only documentation on keywords that I am aware of is in the localization folder, (that you already know of).
Perhaps, post questions for specific items that you are looking to configure.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
Hi Bill,
Today I was hoping to find a way to force colors to be saved with parasolids by default. I know that I can make that choice during the parasolid export procedure but I'd like to find a way to make it "stick".
I found and tried "G_PARASOLID_SAVE_ALL_ATTRIBS 1" but this did not help.
Today I was hoping to find a way to force colors to be saved with parasolids by default. I know that I can make that choice during the parasolid export procedure but I'd like to find a way to make it "stick".
I found and tried "G_PARASOLID_SAVE_ALL_ATTRIBS 1" but this did not help.
TopSolid 2006, Design 6.7.302, Cam 6.7.302, Mold 6.7.302
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
Mastercam X2, Mill3, Wire, Solids, Moldplus, Beta Tester
Hi,
You have to understand that a lot of keywords are only the "txt" translations of options you activate in Tools | Options...So sometimes it is a better idea to go in this dialog bow than in the cfg files...
If you go in the area Interfaces | Parasolid | Export , you will see an option save color. Check the option, it will work for ALL your Parasolid export. If not, it could be a bug
I hope it helps you
Jehronimo
You have to understand that a lot of keywords are only the "txt" translations of options you activate in Tools | Options...So sometimes it is a better idea to go in this dialog bow than in the cfg files...
If you go in the area Interfaces | Parasolid | Export , you will see an option save color. Check the option, it will work for ALL your Parasolid export. If not, it could be a bug
I hope it helps you
Jehronimo
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA
- Matt Berube
- Master Corporal
- Posts: 45
- Joined: Wed Feb 21, 2007 7:08 pm
- Location: Connecticut, USA