Jehronimo,
I tried that and it failed again once I switched it back. Do you have to change the high quality threading to switch it back?
Larry M.
Can not create 2D draft sections
Moderators: remi77, jacs, Daniel
- RICHARD LALONDE
- Sergeant
- Posts: 68
- Joined: Fri Feb 23, 2007 2:07 pm
- Location: Montreal
- Contact:
Mold or draft
Hi guys, I didn't involve with this discussions before because I'm still with the 2007 V68-248 because after that they got probleme with the tapping process of the Jiffy-Plug. I have to switch to the 2008 soon, but I was scare a little bit with everything I read about the mold module V6.9. I know TS still have the probleme with the tapping process of the jiffy plug but that should not affect the section.
My question is to made a full section of the mold in your draft , when you are in the drafting module do you use drafting section or mold section ? bcs mold section is the only choice to made what you want, some people don't know that.
Because I ask my VAR to made a test for me with the V6.9-216 and the full section work and also with the JP-352 without probleme, the only things who don't work again is the tapping process who SHOULD be fix in the 220. When this one will be available for use I will switch to 2008
My question is to made a full section of the mold in your draft , when you are in the drafting module do you use drafting section or mold section ? bcs mold section is the only choice to made what you want, some people don't know that.
Because I ask my VAR to made a test for me with the V6.9-216 and the full section work and also with the JP-352 without probleme, the only things who don't work again is the tapping process who SHOULD be fix in the 220. When this one will be available for use I will switch to 2008
- Bill
- Master Chief
- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 6.25
- Location: Chicago
- Contact:
Correction has been made
Hi all!
It seems that the problem with the JP352 nipples was resolved in the 220 patch. I am sorry I did not report this sooner to you. (as we are on patch 232 now).(which by the way...it works there too!).
Just wanted to pass this along.
It seems that the problem with the JP352 nipples was resolved in the 220 patch. I am sorry I did not report this sooner to you. (as we are on patch 232 now).(which by the way...it works there too!).
Just wanted to pass this along.
Happy Designing
Bill
Technical Director
Missler Software Inc
Bill
Technical Director
Missler Software Inc