Page 1 of 1

[Solved] saving as *.dwg crashes???

Posted: Wed Sep 26, 2007 2:01 pm
by frankm
Hi all,

new spatial translator for our 64 bit version, new problems :roll:

has anyone found a solution for saving drawings as *.dwg files, because one of our customer can read Acad files only.
It works fine with the 32 bit version, but a second installation of the 32 bit version on a 64 bit machine with a already installed 64 bit version is imposible. :shock:

greetings from germany

frank

regarding DWG crashes

Posted: Tue Oct 02, 2007 9:06 pm
by Bill
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?

Re: regarding DWG crashes

Posted: Thu Oct 04, 2007 3:13 pm
by frankm
Bill wrote:Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed

Posted: Sat Oct 13, 2007 11:25 am
by frankm
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank

Posted: Tue Nov 13, 2007 9:57 am
by DownFloppy
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

Posted: Wed Nov 21, 2007 12:19 pm
by frankm
DownFloppy wrote:
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes

--------------------------------------------------------------------------------

Bill wrote:
Hello,

I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?


Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem :D

greets

frank
Not really solved (only 3D). Draft/2D is not possible.

Ups, you are right, doesn`t work correctly, let´s wait for the next patch :cry:

frank