Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...
Moderators: remi77, Daniel, jacs
-
frankm
- Private

- Posts: 8
- Joined: Fri Mar 09, 2007 1:39 pm
- Location: Neunkirchen/Saarland
Unread post
by frankm » Wed Sep 26, 2007 2:01 pm
Hi all,
new spatial translator for our 64 bit version, new problems
has anyone found a solution for saving drawings as *.dwg files, because one of our customer can read Acad files only.
It works fine with the 32 bit version, but a second installation of the 32 bit version on a 64 bit machine with a already installed 64 bit version is imposible.
greetings from germany
frank
-
Bill
- Master Chief

- Posts: 115
- Joined: Wed Feb 21, 2007 8:17 pm
- TopSolid Module: TopSolid'Design
- TopSolid Version: 7.5
- Location: Chicago
-
Contact:
Unread post
by Bill » Tue Oct 02, 2007 9:06 pm
Hello,
I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Happy Designing
Bill
Technical Director
Missler Software Inc
-
frankm
- Private

- Posts: 8
- Joined: Fri Mar 09, 2007 1:39 pm
- Location: Neunkirchen/Saarland
Unread post
by frankm » Thu Oct 04, 2007 3:13 pm
Bill wrote:Hello,
I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed
-
frankm
- Private

- Posts: 8
- Joined: Fri Mar 09, 2007 1:39 pm
- Location: Neunkirchen/Saarland
Unread post
by frankm » Sat Oct 13, 2007 11:25 am
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes
--------------------------------------------------------------------------------
Bill wrote:
Hello,
I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem
greets
frank
-
DownFloppy
- Private

- Posts: 8
- Joined: Thu Aug 16, 2007 7:43 am
Unread post
by DownFloppy » Tue Nov 13, 2007 9:57 am
frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes
--------------------------------------------------------------------------------
Bill wrote:
Hello,
I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem
greets
frank
Not really solved (only 3D). Draft/2D is not possible.
-
frankm
- Private

- Posts: 8
- Joined: Fri Mar 09, 2007 1:39 pm
- Location: Neunkirchen/Saarland
Unread post
by frankm » Wed Nov 21, 2007 12:19 pm
DownFloppy wrote:frankm wrote:
Posted: Thu Oct 04, 2007 1:13 pm Post subject: Re: regarding DWG crashes
--------------------------------------------------------------------------------
Bill wrote:
Hello,
I have heard of this problem before. Have you tried to export using both of the DWG translators? Do you get the same result? Are you running the latest patch (232)?
Both translators crashes, latest patch is installed
Good news, patch 236 solved the problem
greets
frank
Not really solved (only 3D). Draft/2D is not possible.
Ups, you are right, doesn`t work correctly, let´s wait for the next patch
frank