Is there a way to make a Full Section in another scale?
Like I have this front view 1:10 and I would like my Full Section 1:1 so I can make the Interrupted View.
Full Section in another scale?
Moderators: remi77, jacs, Daniel
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Full Section in another scale?
Last edited by CAD_73 on Mon Feb 16, 2015 8:58 pm, edited 1 time in total.
-
- Chief
- Posts: 107
- Joined: Mon Mar 26, 2007 9:40 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
- Location: The netherlands
- Contact:
Re: Full Section in another scale?
Yes
Like you can change it in each other type of auxiliary view. Use the wrench and select the frame of the view to edit the basic settings. Directly at the top you will see lookalike definition of the scale. Use this to break the link of the scale between the reference view and this view. Type the factor you want in the box.
At the bottom of this same window you can also switch on a title containing the scale.
Grz
Mark
Like you can change it in each other type of auxiliary view. Use the wrench and select the frame of the view to edit the basic settings. Directly at the top you will see lookalike definition of the scale. Use this to break the link of the scale between the reference view and this view. Type the factor you want in the box.
At the bottom of this same window you can also switch on a title containing the scale.
Grz
Mark
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Full Section in another scale?
Thanks, it works