[Solved] different type of hole table

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, Daniel, jacs

First Officer Cadet
First Officer Cadet
Posts: 245
Joined: Fri Jun 15, 2007 3:05 pm

[Solved] different type of hole table

Unread post by Top'Noob »


Is there an easy way to get a hole table like what is shown in this picture ?

So far I find the "drills table" gives way too much information for my needs and I don't like the way that each hole has a unique label.

User avatar
Master Chief
Master Chief
Posts: 115
Joined: Wed Feb 21, 2007 8:17 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 7.3
Location: Chicago

regarding Drill Tables

Unread post by Bill »


Today, I don't think that this is possible. The drill table function is design to give you the Type of Drilling, its diameter, depth and it's location. If you where to lable all common drillings diameters with the same name, you could not show the rest of the information that is provided. Perhaps, use the drilling dimension function. If you put in a TopSolid Drilling feature, and then make a pattern of it, the drilling dimension function will give you a note with the drilling information as well as the quantity.

have fun!
Happy Designing
Technical Director
Missler Software Inc
Post Reply