Lines disapearing in a view

Drawing, bill of material, 2D design, dimensioning, labeling, tolerances, symbols, title blocks...

Moderators: remi77, jacs, Daniel

Atenath
Private
Private
Posts: 7
Joined: Thu Feb 06, 2020 7:34 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 6.21

Lines disapearing in a view

Unread post by Atenath »

Hello,

I wonder if any of you guys have this issue when you put assembly in a draft view it seems like some lines are removed (1) and others are shown even if they are behind a part (2). Does any knows how to fix this? Or it's just one of those still ongoing bugs? Maybe I should adjust some gpu settings, or not?

How do you solve that cases? Because sometimes when everything with a view is ok and later when you open it after two months/weeks or even a next day (hardly matters) you get this little gifts :)

no_lines in draft.jpg
by olaio » Mon Sep 06, 2021 12:35 pm
Hi,

can you check if the parts are not intersecting?
When we have intersections between parts we can have this kind of problems.

Olaio
Go to full post
PAULVANTHOFF
Corporal
Corporal
Posts: 20
Joined: Mon Jul 08, 2019 2:00 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.21

Re: Lines disapearing in a view

Unread post by PAULVANTHOFF »

which graphic card do you have?
Regards,
Paul
Atenath
Private
Private
Posts: 7
Joined: Thu Feb 06, 2020 7:34 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 6.21

Re: Lines disapearing in a view

Unread post by Atenath »

On my desktop I have a Nvidia Quadro P2200. My colleagues have the same issue on gaming laptops which have Nvidia geforce GTX (gaming cards: 1050 and 750 series) or other Desktop which has GTX 1060. Maybe some graphical settings are wrong (added in a picture below to make it more clear)?
Graphics settings.png
User avatar
olaio
Second Officer Cadet
Second Officer Cadet
Posts: 194
Joined: Thu Mar 01, 2007 11:42 am
Answers: 2
Location: Leiria

Re: Lines disapearing in a view

Unread post by olaio »

Hi,

can you check if the parts are not intersecting?
When we have intersections between parts we can have this kind of problems.

Olaio
Atenath
Private
Private
Posts: 7
Joined: Thu Feb 06, 2020 7:34 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 6.21

Re: Lines disapearing in a view

Unread post by Atenath »

olaio wrote: Mon Sep 06, 2021 12:35 pm Hi,

can you check if the parts are not intersecting?
When we have intersections between parts we can have this kind of problems.

Olaio
Sorry for taking so long to answer. Made few tests and tried to analyze some of our models I think you're correct about intersections causing this bug in draft. Marking you answer as solved unless there'd pop up something else in a future but I strongly doubt it. :wink:
Post Reply