[Solved] Problem conversion draft to dxf-file

Product design in 3D, mechanical engineering, kinematics, dynamics, parts and components, surfacic, assemblies...

Moderators: remi77, Daniel, jacs

Truus
Private
Private
Posts: 3
Joined: Fri Jun 19, 2009 1:26 pm

[Solved] Problem conversion draft to dxf-file

Unread post by Truus » Fri Jun 19, 2009 1:35 pm

I am working with TopSolid Design 2009 (v6.10.212)
When I open a dxf-file in autocad, created with "save as" Autocad V6.7 dxf in TopSolid;
I got the following problem :
The contour-line of the part has a line who is thicker than the other lines.
How can I solve that problem?

Top'Noob
First Officer Cadet
First Officer Cadet
Posts: 245
Joined: Fri Jun 15, 2007 3:05 pm

Unread post by Top'Noob » Fri Jun 19, 2009 1:58 pm

I often get strange results from the TopSolid .dxf / .dwg translators.

I usually try different translator versions until the appearance is better...

P.S. Welcome to the forum :)

Truus
Private
Private
Posts: 3
Joined: Fri Jun 19, 2009 1:26 pm

Unread post by Truus » Wed Oct 14, 2009 10:16 am

Thanks,
A good solution :lol:

User avatar
olaio
Volunteer Cadet
Volunteer Cadet
Posts: 182
Joined: Thu Mar 01, 2007 11:42 am
Location: Leiria

Unread post by olaio » Wed Oct 14, 2009 2:48 pm

Hi,

In autocad you can explode the contour, then it should have the same thickness than the other lines.

User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 » Tue Oct 20, 2009 3:31 pm

The best solution we found here was to firstly save the dft file as igs and open again this igs file and save as dxf/dwg...

The draw looks great this way, but the dimensions obviously were only texts.
TopSolid Users!!!!

Post Reply