Hello,
I would like to suggest to allow negative offset values in command Part Document > Shape > "Angles Clearance".
Thanks.
Angles Clearance - Offset
Moderators: remi77, jacs, Daniel
-
- Private First Class
- Posts: 14
- Joined: Thu Oct 19, 2017 2:07 pm
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 7.4
Re: Angles Clearance - Offset
I forgot to mention...:
When "Symmetrical" or "On face" is selected.
When "Symmetrical" or "On face" is selected.