Hi all TopSolid users.
I think it would be very nice a new way to propagate operations like holes and select other operation to avoid it.
Ex.
I will make a hole and propate it in a matrix mode for the entire part I am designing. but I already have done a slot.
Today I will need to propagate and after it to exclude some instances.
Is there a way to propagate avoiding a specific area or previous operations?
Thanks in advance
New kind of propagation
Moderators: remi77, jacs, Daniel
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
I am here daily.TopSolid2007 wrote:Is there anybody reading or posting on this forum???
It is still pretty quiet here because there are only 142 members so far...
Check out this movie. Is this what you want ?
http://www.box.net/shared/zckon2cqd3
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
Yes, it works fine. It is what I am just doing right now, but I would like to discover a way to select previously an area or operation to avoid the propagation whitout use this option to exclude instances.
It would help me because I am currently drawing several parametric parts and the propagated holes are in the same place that the porevious fixture hole I made on the plate.
When I use this function to exclude a instance it works fine, but when I change the paramters of quantities on the propagation I am forced to restore all instances and select other instances to be excluded...
It would help me because I am currently drawing several parametric parts and the propagated holes are in the same place that the porevious fixture hole I made on the plate.
When I use this function to exclude a instance it works fine, but when I change the paramters of quantities on the propagation I am forced to restore all instances and select other instances to be excluded...
Hi TopSolid2007!
Maybe you talk about this?
... exclude instance / by closed curves
look at this
http://www.box.net/shared/s1y58emdpj
or the *.top
http://www.box.net/shared/lyngdvfmx4
but be sure to click on the point of the first hole (or feature)
Maybe you talk about this?
... exclude instance / by closed curves
look at this
http://www.box.net/shared/s1y58emdpj
or the *.top
http://www.box.net/shared/lyngdvfmx4
but be sure to click on the point of the first hole (or feature)
Don´t worry - It´s me!
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact: