Hello
I apologize in advance for my English.
I have a problem in milling the excentric grooves on the circumference of the cylinder. When milling I need the cutter to be in the center of the piece axis (Y = 0). However, when generating a trajectory, the tool goes out of the axis (Y = 5 and Y = -5). I have disabled the OffCenter feature.
Can it be that, the groove is eccentric? Is it possible to adjust the tool to the center of the axis?
Thank you
Milling in the center axis
Moderators: remi77, Daniel, Bill
-
- Private
- Posts: 4
- Joined: Sat Jun 30, 2018 6:49 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26
-
- Private
- Posts: 4
- Joined: Sat Jun 30, 2018 6:49 am
- TopSolid Module: TopSolid'Cam
- TopSolid Version: 6.26