Displaying tool by hovering over part

Everything about new TopSolid'Cam 7 software.

Moderators: remi77, Daniel, Bill

User avatar
michelle
Sergeant
Sergeant
Posts: 67
Joined: Sun Sep 20, 2009 7:45 pm
TopSolid Version: 7.6

Displaying tool by hovering over part

Unread post by michelle » Mon Sep 18, 2017 5:31 pm

Hi there,

If you click on the below link and watch the next 5 seconds of this TopSolid Tutorial you'll see that the tool which is currently being built becomes visible. Whilst I have all the settings windows open and can follow those step by step, my tool however does not become visible when I hover over my part.

https://youtu.be/oc0VfqkQk58?t=1m30s

Could anyone tell me how to "switch on" the visualisation of my tool (which I do indeed see during simulation).

Thanks
Michelle
Last edited by michelle on Thu Sep 21, 2017 7:55 am, edited 1 time in total.

Billetgrip
Corporal
Corporal
Posts: 20
Joined: Fri Jun 24, 2016 1:37 pm
TopSolid Module: TopSolid'Cam
TopSolid Version: 7.11
Location: Huntsville, AL

Re: Displaying tool by hovering over part

Unread post by Billetgrip » Wed Sep 20, 2017 4:52 pm

The bottom icon to the right of your screen(while you have an operation open) controls this.
ToolHide.JPG

User avatar
michelle
Sergeant
Sergeant
Posts: 67
Joined: Sun Sep 20, 2009 7:45 pm
TopSolid Version: 7.6

Re: Displaying tool by hovering over part

Unread post by michelle » Thu Sep 21, 2017 7:55 am

Thanks Bill, another mystery solved! :-)

Post Reply