One of my projects,
it should show a detailed design with edges/veneer and different joints.
I also added some kinematics for the lift.
TopSolid'Wood: Furniture with TV-Lift
Moderators: remi77, jacs, Daniel
-
- Private First Class
- Posts: 15
- Joined: Thu Feb 14, 2008 1:24 pm
- TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
- Contact:
-
- Private First Class
- Posts: 15
- Joined: Thu Feb 14, 2008 1:24 pm
Hi,
thats a collection of different lists/bom, nothing special.
I use lines to align them on each other on the paper.
List of parts (index,name,count,material,length,width,thickness....)
List of used materials (showing all used materials + coatings)
List of used edges/veneer (showing all used edges + veener)
revison index
title block
i have to adjust the height parameter of those lists if their size increases the default values, those parameters are invisible in the picture.
Which problems do you have with your lists?
thats a collection of different lists/bom, nothing special.
I use lines to align them on each other on the paper.
List of parts (index,name,count,material,length,width,thickness....)
List of used materials (showing all used materials + coatings)
List of used edges/veneer (showing all used edges + veener)
revison index
title block
i have to adjust the height parameter of those lists if their size increases the default values, those parameters are invisible in the picture.
Which problems do you have with your lists?