[Solved] trouble with TopSolid'woodcam x64 patch V6.10.236

Issues and questions related to TopSolid installation.

Moderators: remi77, Daniel, jacs

GrainWise
Private First Class
Private First Class
Posts: 17
Joined: Tue May 19, 2009 4:39 pm
Location: Southern Virginia

[Solved] trouble with TopSolid'woodcam x64 patch V6.10.236

Unread post by GrainWise » Tue Nov 24, 2009 4:03 pm

I'm trying to update the woodcam side of TopSolidx64 and have already done the global patch to the design side(updated to 6.10.236), but the file on the TopSolid site for the woodcam is the same as the design. Is there a patch for the woodcam available, or am I just not seeing it?

This is where I'm looking: http://www.TopSolid.com/download/patch/ ... 9&from=2XX
...and when I try do download the current version, the file that it starts downloading is the global patch and not the woodcam.

Help please.

-Kevin

Liam
Private
Private
Posts: 8
Joined: Thu Feb 22, 2007 11:23 am
Location: Villeurbanne
Contact:

Unread post by Liam » Wed Nov 25, 2009 8:35 am

Hi Kevin,

The section you selected is for the wood design (so it's the same as the main design).


About TopSolid'WoodCam patch, you need to select the woodcam section (end of the list ;) )

http://TopSolid.com/download/patch/patc ... 9&from=2XX

When you install patches, you have to install the same patch number for the design patch and the woodcam patch to avoid problem of compatibility.

Actually the last woodcam patch is the 228 ...
The patch 236 will be published before the end of the week.

Cheers !

GrainWise
Private First Class
Private First Class
Posts: 17
Joined: Tue May 19, 2009 4:39 pm
Location: Southern Virginia

Unread post by GrainWise » Wed Nov 25, 2009 4:46 pm

Thanks, Liam!

I've already installed the .236 patch to the design side, and will go ahead and wait till the .236 is released for the woodcam later this week. We're out on Thanksgiving holiday till Monday, I'll look for the new patch then.

Cordially,

-kevin

Post Reply