Hi
How do I exclude a screw from the drilling?
Clash shape doesn't work here.
See the video
Exclude from the drilling
Moderators: remi77, jacs, Daniel
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Exclude from the drilling
Couple things you could do.
1.) put the drilling in with the leveler since that is what needs the drilling
2.) a clash shape will work but it needs to be the difference between the shaft and the hole so it should look like a hollow cylinder. sketch should be two circles extruded as one shape.
1.) put the drilling in with the leveler since that is what needs the drilling
2.) a clash shape will work but it needs to be the difference between the shaft and the hole so it should look like a hollow cylinder. sketch should be two circles extruded as one shape.
- MadCat
- Master Corporal
- Posts: 39
- Joined: Mon Jun 06, 2022 3:26 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 7.17
- Contact:
Re: Exclude from the drilling
Please, what is the "leveler" in TopSolid?
----
I made the martyr part with drilling in the assembly (instead of martyr on the bracket detail) and it works well.
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Exclude from the drilling
Hello
One option is to remove bottom panel hole from leg component and make new martyr with holes into component where You have 4 legs.
RM
One option is to remove bottom panel hole from leg component and make new martyr with holes into component where You have 4 legs.
RM
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Exclude from the drilling
You have multiple levels to your assembly before you need the hole in the cabinet
1. part is the Bracket with tooling
2. part is the Leveler no tooling
3. the Bracket and the Leveler assembly (in this file the bracket does not need to have tooling operated for it to operate on the cabinet) delete it if it is
4. the Driver Block with 4 of the Bracket & leveler assemblies.
5. Cabinet where this component is used needs the tooling to operate.
1. part is the Bracket with tooling
2. part is the Leveler no tooling
3. the Bracket and the Leveler assembly (in this file the bracket does not need to have tooling operated for it to operate on the cabinet) delete it if it is
4. the Driver Block with 4 of the Bracket & leveler assemblies.
5. Cabinet where this component is used needs the tooling to operate.