Exclude from the drilling

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, jacs, Daniel

User avatar
MadCat
Master Corporal
Master Corporal
Posts: 37
Joined: Mon Jun 06, 2022 3:26 am
Answers: 1
TopSolid Module: TopSolid'Wood
TopSolid Version: 7.17
Contact:

Exclude from the drilling

Unread post by MadCat »

Hi
How do I exclude a screw from the drilling?
Clash shape doesn't work here.
See the video
Attachments
3700.jpg
User avatar
Todd
First Officer Cadet
First Officer Cadet
Posts: 246
Joined: Mon Nov 10, 2014 9:28 pm
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: Detroit, MI

Re: Exclude from the drilling

Unread post by Todd »

Couple things you could do.
1.) put the drilling in with the leveler since that is what needs the drilling
2.) a clash shape will work but it needs to be the difference between the shaft and the hole so it should look like a hollow cylinder. sketch should be two circles extruded as one shape.
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com
User avatar
MadCat
Master Corporal
Master Corporal
Posts: 37
Joined: Mon Jun 06, 2022 3:26 am
Answers: 1
TopSolid Module: TopSolid'Wood
TopSolid Version: 7.17
Contact:

Re: Exclude from the drilling

Unread post by MadCat »

Todd wrote: Fri May 05, 2023 4:57 pm put the drilling in with the leveler
Please, what is the "leveler" in TopSolid?
----
I made the martyr part with drilling in the assembly (instead of martyr on the bracket detail) and it works well.
Attachments
3700 (1).jpg
RaudMees
Second Officer Cadet
Second Officer Cadet
Posts: 209
Joined: Wed Dec 30, 2015 11:25 am
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: Exclude from the drilling

Unread post by RaudMees »

Hello

One option is to remove bottom panel hole from leg component and make new martyr with holes into component where You have 4 legs.

RM
User avatar
Todd
First Officer Cadet
First Officer Cadet
Posts: 246
Joined: Mon Nov 10, 2014 9:28 pm
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.24
Location: Detroit, MI

Re: Exclude from the drilling

Unread post by Todd »

You have multiple levels to your assembly before you need the hole in the cabinet
1. part is the Bracket with tooling
2. part is the Leveler no tooling
3. the Bracket and the Leveler assembly (in this file the bracket does not need to have tooling operated for it to operate on the cabinet) delete it if it is
4. the Driver Block with 4 of the Bracket & leveler assemblies.
5. Cabinet where this component is used needs the tooling to operate.
Attachments
BRACKET & LEVELER NO TOOL AUTO 2.png
this file the bracket is operate tooling it does not need too
this file the bracket is operate tooling it does not need too
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com
Post Reply