Hello
I made a dowel component which connect 2 shelves and middle panel. Whatever I do, dowel is not in correct position. Second side hole depth is wrong and dowel have to be more out of the middle panel.
Any ideas?
RM
Dowel through middle panel
Moderators: remi77, jacs, Daniel
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Dowel through middle panel
- Attachments
-
- dowel.png (5.21 KiB) Viewed 4992 times
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Dowel through middle panel
Did you use the kit tool?
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: Dowel through middle panel
Hi
Not yet, I tried with dowel and screw functions. Kit tool may help, will check later.
RM
Not yet, I tried with dowel and screw functions. Kit tool may help, will check later.
RM
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Dowel through middle panel
Make sure your model, sketch's, or curves and key point are not referencing the absolute coordinate system.