The first machining face was revert when nesting

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, jacs, Daniel

sinvia
Sergeant
Sergeant
Posts: 61
Joined: Sun Apr 24, 2016 5:34 pm
Answers: 1
TopSolid Module: TopSolid'Steel
TopSolid Version: 6.21

The first machining face was revert when nesting

Unread post by sinvia »

Dear All,

When i nesting, there are some parts were placed in wrong way. The first maching face is place reverse. So there are nothing after machinging.

How to fix this problems.

Thanks All,
by RaudMees » Thu Oct 14, 2021 7:10 pm
I am using this system.
Go to full post
Woody31
Sergeant
Sergeant
Posts: 68
Joined: Thu Mar 25, 2021 4:39 pm
Answers: 8
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.23
Location: Toulouse
Contact:

Re: The first machining face was revert when nesting

Unread post by Woody31 »

Hello

is the part with the "wrong" orientation defined in optimized mode for machining?
Also did you ask for the face optimisation when doing the nesting?

Thanks
RaudMees
Second Officer Cadet
Second Officer Cadet
Posts: 209
Joined: Wed Dec 30, 2015 11:25 am
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: The first machining face was revert when nesting

Unread post by RaudMees »

Hello

To avoid empty machinings, I am using pre-defined components from library and they are always forced to machine only right way. To make them correctly, then I do one hole into corner and checking machining under part definition to have it only right way in machine. When it's defined, then I delete that hole. I don't use optimizing, because in beam cnc front edge can be here and there, but I need parts only one way in machine.

RM
sinvia
Sergeant
Sergeant
Posts: 61
Joined: Sun Apr 24, 2016 5:34 pm
Answers: 1
TopSolid Module: TopSolid'Steel
TopSolid Version: 6.21

Re: The first machining face was revert when nesting

Unread post by sinvia »

Dear Woody31, Raudmees

Z axis oriental is the first machining. So when I define the parts, I will change the Z axis orietal that I want. Problem is that there are some part is not following the normal.

Thank you friends,
RaudMees
Second Officer Cadet
Second Officer Cadet
Posts: 209
Joined: Wed Dec 30, 2015 11:25 am
Answers: 3
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: The first machining face was revert when nesting

Unread post by RaudMees »

I am using this system.
Attachments
machi.png
Jason_Scott
Corporal
Corporal
Posts: 20
Joined: Mon Aug 14, 2017 7:07 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.18

Re: The first machining face was revert when nesting

Unread post by Jason_Scott »

Your picture shows that you have it forced to that position on the machine.
You can either turn it to optimized or force it to be flipped from what it is now.
Jason Scott
Scott Custom Woodworks
435-230-0965
Post Reply