Controlling the orientation of the part when nesting

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, jacs, Daniel

sinvia
Sergeant
Sergeant
Posts: 61
Joined: Sun Apr 24, 2016 5:34 pm
Answers: 1
TopSolid Module: TopSolid'Steel
TopSolid Version: 6.21

Controlling the orientation of the part when nesting

Unread post by sinvia »

Dear All friends,

After nesting I got this placed parts. They are not same orientation. How to place them in same orientation and towards one side.

Image
Image

Thanks

Sinvia
by Woody31 » Mon Mar 29, 2021 3:58 pm
Hello

there is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )

By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
Go to full post
Woody31
Sergeant
Sergeant
Posts: 68
Joined: Thu Mar 25, 2021 4:39 pm
Answers: 8
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.23
Location: Toulouse
Contact:

Re: Controlling the orientation of the part when nesting

Unread post by Woody31 »

Hello

there is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )

By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
sinvia
Sergeant
Sergeant
Posts: 61
Joined: Sun Apr 24, 2016 5:34 pm
Answers: 1
TopSolid Module: TopSolid'Steel
TopSolid Version: 6.21

Re: Controlling the orientation of the part when nesting

Unread post by sinvia »

Dear Woody,

It worked, thank you
Woody31
Sergeant
Sergeant
Posts: 68
Joined: Thu Mar 25, 2021 4:39 pm
Answers: 8
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.23
Location: Toulouse
Contact:

Re: Controlling the orientation of the part when nesting

Unread post by Woody31 »

Glad i could help
Post Reply