Dear All friends,
After nesting I got this placed parts. They are not same orientation. How to place them in same orientation and towards one side.
Thanks
Sinvia
Controlling the orientation of the part when nesting
Moderators: remi77, jacs, Daniel
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Controlling the orientation of the part when nesting
Hello
there is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )
By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
Go to full postthere is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )
By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
-
- Sergeant
- Posts: 68
- Joined: Thu Mar 25, 2021 4:39 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.23
- Location: Toulouse
- Contact:
Re: Controlling the orientation of the part when nesting
Hello
there is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )
By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
there is 2 options
1) you use a cluster to force the orientation
2) in define part ( 6.22 you can try to gice a 0° freedom rotation in the tab Nesting )
By the way the defaut values of the nesting settings are not the best, i used to ask for a Maximum filling Down Left option in the Complex strategy.
Hope it will help
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: Controlling the orientation of the part when nesting
Dear Woody,
It worked, thank you
It worked, thank you
-
- Sergeant
- Posts: 68
- Joined: Thu Mar 25, 2021 4:39 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.23
- Location: Toulouse
- Contact:
Re: Controlling the orientation of the part when nesting
Glad i could help