Dear All Friends
I have a nesting label, when i print it, the light color (orange) is not enough dark as I want. Can you help to to configure is to be darker?
pa
Thank you,
Sinvia
Configure print to be darker
Moderators: remi77, jacs, Daniel
- Laurens
- Sergeant
- Posts: 50
- Joined: Tue Apr 16, 2019 7:29 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
Re: Configure print to be darker
Hello Sinvia,
When printing you can select configuration in the printing window where you can also select your printer and/or paper size. this will open a new window where you can select which colour gets plotted how. you could say i want all green parts to be printed blue for example. this will also allow you to select any shade of orange you want. after you are done selecting your colours you can save the settings as CFG file for future use.
When printing you can select configuration in the printing window where you can also select your printer and/or paper size. this will open a new window where you can select which colour gets plotted how. you could say i want all green parts to be printed blue for example. this will also allow you to select any shade of orange you want. after you are done selecting your colours you can save the settings as CFG file for future use.
Laurens
Team leader TSW draftsmen
De Klerk Binnenbouw
Team leader TSW draftsmen
De Klerk Binnenbouw
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: Configure print to be darker
Dear All
I change the printer config like this
But it did not work
Thanks for helping
Sinvia
I change the printer config like this
But it did not work
Thanks for helping
Sinvia
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Configure print to be darker
Are you sure that you are using that .cfg for printing?
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: Configure print to be darker
Dear CAD_73
Can you send me your printer configure if you don't mind
Thank you
Can you send me your printer configure if you don't mind
Thank you
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: Configure print to be darker
Nothing special, here you go.