Dear All
Recently, when I define the parts, TS create "TopSolid'Wood rough". Do you know how to fix this.
https://ibb.co/QQfQ4kP
Thanks
TopSolid'Wood Rough
Moderators: remi77, jacs, Daniel
- CAD_73
- Second Officer Cadet
- Posts: 207
- Joined: Thu Oct 30, 2014 11:59 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: The Netherlands
Re: TopSolid'Wood Rough
You accidentally checked this one
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: TopSolid'Wood Rough
the fix is simple when you go to define a part for the first time in a file uncheck the make stock box before selecting ok and then it should remember that for all define parts going forward. the problem was if you ever checked it on for a part and left it on then every part defined following that one would have that box checked as default.
-
- Sergeant
- Posts: 61
- Joined: Sun Apr 24, 2016 5:34 pm
- TopSolid Module: TopSolid'Steel
- TopSolid Version: 6.21
Re: TopSolid'Wood Rough
Dear Todd, Cad_73,
It worked, thank you very much,
It worked, thank you very much,