✅ How to create serial copy of parts
Moderators: remi77, jacs, Daniel
-
- Private First Class
- Posts: 12
- Joined: Sat Dec 15, 2018 10:46 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
✅ How to create serial copy of parts
Hello,
We have a situation where we want to create number of parts in curvature distribution. (as attached image)
I have found a similar video on youtube showing the same design but did not understand.
https://youtu.be/FWskGKAi-wk?t=26
Can anybody suggest how to create this type of design easily.
Thanks & Regards,
Praful
We have a situation where we want to create number of parts in curvature distribution. (as attached image)
I have found a similar video on youtube showing the same design but did not understand.
https://youtu.be/FWskGKAi-wk?t=26
Can anybody suggest how to create this type of design easily.
Thanks & Regards,
Praful
Last edited by PrafulGaikwad on Sat Sep 03, 2022 8:20 am, edited 6 times in total.
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: How to create serial copy of parts
Hello
Read this document: TopSolid.TT.Wood.Serial.Copy.v6.17. Ask it from reseller.
RM
Read this document: TopSolid.TT.Wood.Serial.Copy.v6.17. Ask it from reseller.
RM
-
- Private First Class
- Posts: 12
- Joined: Sat Dec 15, 2018 10:46 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
Re: How to create serial copy of parts
Thanks for your reply.
Can you please tell me which topic is that, I have read it but nothing found related.
Thanks,
Praful
Can you please tell me which topic is that, I have read it but nothing found related.
Thanks,
Praful
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: How to create serial copy of parts
]When you make the component you will need to create driving points that are not constrained and those points will be used to follow each guide curve that will be divided equally based on how many panels you need
- OMG
- Master Chief
- Posts: 112
- Joined: Sun Nov 11, 2018 7:26 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
Re: How to create serial copy of parts
Hello
I can send you these via e-mail
MG
I can send you these via e-mail
MG
-
- Corporal
- Posts: 20
- Joined: Mon Aug 14, 2017 7:07 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.18
Re: How to create serial copy of parts
OMG if you could email them to me also I would appreciate it greatly.
jason_cabinetmaker@yahoo.com
Thanks in advance.
jason_cabinetmaker@yahoo.com
Thanks in advance.
Jason Scott
Scott Custom Woodworks
435-230-0965
Scott Custom Woodworks
435-230-0965
- OMG
- Master Chief
- Posts: 112
- Joined: Sun Nov 11, 2018 7:26 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
Re: How to create serial copy of parts
solved
I've sent you the e-mail
I've sent you the e-mail
Last edited by OMG on Wed Sep 30, 2020 9:18 am, edited 1 time in total.
Re: How to create serial copy of parts
Hi
Solved ?
In that case, you may add the green check on your first message
See you
Rémi
Solved ?
In that case, you may add the green check on your first message
See you
Rémi
Thanks to use the on the best answer when you've got the solution.
- OMG
- Master Chief
- Posts: 112
- Joined: Sun Nov 11, 2018 7:26 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
Re: How to create serial copy of parts
"solved" means I've sent him the e-mail
is not my post to edit it as "solved"
is not my post to edit it as "solved"
Re: How to create serial copy of parts
Hi
Of course it's not
Rémi
Of course it's not
Rémi
Last bumped by PrafulGaikwad on Sat Sep 03, 2022 8:06 am.
Thanks to use the on the best answer when you've got the solution.