information on nesting label

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, Daniel, jacs

User avatar
jwdesign
Private First Class
Private First Class
Posts: 13
Joined: Fri Jul 06, 2012 7:55 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Israel
Contact:

information on nesting label

Unread post by jwdesign » Sun Feb 02, 2020 10:50 pm

hello is some one now how can i put the information that in the photo to label cell
תמונה1.JPG
תמונה2.JPG
תמונה3.JPG

RaudMees
Master Chief
Master Chief
Posts: 138
Joined: Wed Dec 30, 2015 11:25 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: information on nesting label

Unread post by RaudMees » Wed Feb 05, 2020 1:51 pm

What information is it? Dont understand those big numbers.

RM

User avatar
Todd
Second Officer Cadet
Second Officer Cadet
Posts: 206
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: information on nesting label

Unread post by Todd » Wed Feb 05, 2020 2:28 pm

What this person is trying to get is the part label in the nest into the title block (example of the syntax you put in your BOM template to customize the Part label is below). so basically they are stringing together multiple part characteristics and they should do the same combo in that title block cell is what I would suggest.
NAME=IDENTIFICATION
"DEF=<WOO_NESTING_IDENTIFICATION|$DESIGNATION|OWNER_PRJ$---Part: $INDEX_3D$ >"
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com

User avatar
jwdesign
Private First Class
Private First Class
Posts: 13
Joined: Fri Jul 06, 2012 7:55 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Israel
Contact:

Re: information on nesting label

Unread post by jwdesign » Wed Feb 12, 2020 3:42 pm

Hello Todd
this is my bom syntax that going to the nesting plate DEF=<WOO_NESTING_IDENTIFICATION|ID-$INDEX_3D$-$DGI|Name:UNIT_NAME$|$DESIGNATION$|$INDEX_3D|OWNER_1$>

when i put the same bom syntax to label TopSolid is not transfer the index information from subfolders index $INDEX_3D|OWNER_1$
that way i want to get the information fro the result of the nesting if it is poseble

User avatar
Todd
Second Officer Cadet
Second Officer Cadet
Posts: 206
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: information on nesting label

Unread post by Todd » Thu Feb 13, 2020 2:45 pm

So you will want to insert the property from BOM into the title block otherwise without the BOM property in your template there no way to get the data into the draft file to make the link. below is custom column property example I used in one my BOM templates
NAME=SUB-ASSEMBLY
"DEF=<DESIGNATION|OWNER_n>"
TYPE=STRING
ALIGN=CENTRE
TITLE_ALIGN=CENTRE
WIDTH=0.047625
VISIBLE=YES
;
Attachments
BOM PROP.png
Wood codification US.PDF
(701.6 KiB) Downloaded 9 times
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com

User avatar
jwdesign
Private First Class
Private First Class
Posts: 13
Joined: Fri Jul 06, 2012 7:55 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Israel
Contact:

Re: information on nesting label

Unread post by jwdesign » Thu Feb 13, 2020 3:56 pm

hello Todd
you using
"DEF=<DESIGNATION|OWNER_n>"
this is working no problem when you use multi draft or multi draft nesting


i using
"DEF=<INDEX3D|OWNER_n>"
when you using multi draft nesting label. TopSolid is not sending the index infromation that in the sub folder.
the sub folder is get automatic numbering in the index and that the information that i need on title block off the label
1.jpg
thats way i want to take the information from the nested plate and not from BOM if this is posseble

User avatar
Todd
Second Officer Cadet
Second Officer Cadet
Posts: 206
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: information on nesting label

Unread post by Todd » Thu Feb 13, 2020 4:15 pm

Yeah I'm not sure if that possible either. Maybe someone else knows or you will have to ask missler tech direct through your support
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com

User avatar
Todd
Second Officer Cadet
Second Officer Cadet
Posts: 206
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: information on nesting label

Unread post by Todd » Thu Feb 13, 2020 4:17 pm

also check your syntax is correct <INDEX_3D> your missing the underscore
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com

User avatar
jwdesign
Private First Class
Private First Class
Posts: 13
Joined: Fri Jul 06, 2012 7:55 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Israel
Contact:

Re: information on nesting label

Unread post by jwdesign » Thu Feb 13, 2020 5:37 pm

tank you Todd. maibe someone from this forum will now how to do that without BOM
the syntax is corect i write it in forum not corect
this is my syntax DEF=<WOO_NESTING_IDENTIFICATION|ID-$INDEX_3D$-$DGI|Name:UNIT_NAME$|$DESIGNATION$|$INDEX_3D|OWNER_1$>

Post Reply