Page 1 of 1

laminate designation

Posted: Thu Jan 16, 2020 3:15 pm
by valer_y
Hello everybody
driver name and value is added to designation laminate shape
is there any way to fix this.


Re: laminate designation

Posted: Tue Jan 21, 2020 2:39 pm
by Todd
If you use the panel function you should not have this issue. Laminate and edge functions are older and do not work the same as panel

Re: laminate designation

Posted: Sun Feb 02, 2020 9:12 am
by valer_y
hi Tod
I do not use the function panel, in the common there were a lot of errors related to it.
and I solved this problem, changing the name.

Re: laminate designation

Posted: Sun Feb 02, 2020 7:07 pm
by RaudMees
Hi valer_y

It's a bit out of topic, but this is the thing how it's possible to make workaround in TopSolid. For me this is another option what is possible to show in part definition window. I am using there lot of parameters, some samples:
1) extruded part length - Pipe L=[L]mm and in BOM - Pipe L=1829mm
2) component, which is made in driver block - Door [db.z]*[db.x]*[db.y] - BOM = Door 2090x890x92

Some customers needs some data only in this way. It's possible to mix it in Excel too, but TopSolid can do that too.