Hello everybody
driver name and value is added to designation laminate shape
is there any way to fix this.
thanks
laminate designation
Moderators: remi77, jacs, Daniel
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: laminate designation
If you use the panel function you should not have this issue. Laminate and edge functions are older and do not work the same as panel
-
- Private First Class
- Posts: 15
- Joined: Sat Jun 16, 2018 10:16 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.19
Re: laminate designation
hi Tod
I do not use the function panel, in the common there were a lot of errors related to it.
and I solved this problem, changing the name.
thanks
I do not use the function panel, in the common there were a lot of errors related to it.
and I solved this problem, changing the name.
thanks
- Attachments
-
- LAMINATE.PNG (10.09 KiB) Viewed 972 times
-
- Second Officer Cadet
- Posts: 209
- Joined: Wed Dec 30, 2015 11:25 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.20
- Contact:
Re: laminate designation
Hi valer_y
It's a bit out of topic, but this is the thing how it's possible to make workaround in TopSolid. For me this is another option what is possible to show in part definition window. I am using there lot of parameters, some samples:
1) extruded part length - Pipe L=[L]mm and in BOM - Pipe L=1829mm
2) component, which is made in driver block - Door [db.z]*[db.x]*[db.y] - BOM = Door 2090x890x92
etc.
Some customers needs some data only in this way. It's possible to mix it in Excel too, but TopSolid can do that too.
RM
It's a bit out of topic, but this is the thing how it's possible to make workaround in TopSolid. For me this is another option what is possible to show in part definition window. I am using there lot of parameters, some samples:
1) extruded part length - Pipe L=[L]mm and in BOM - Pipe L=1829mm
2) component, which is made in driver block - Door [db.z]*[db.x]*[db.y] - BOM = Door 2090x890x92
etc.
Some customers needs some data only in this way. It's possible to mix it in Excel too, but TopSolid can do that too.
RM