laminate designation

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, Daniel, jacs

valer_y
Private First Class
Private First Class
Posts: 11
Joined: Sat Jun 16, 2018 10:16 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.19

laminate designation

Unread post by valer_y » Thu Jan 16, 2020 3:15 pm

Hello everybody
driver name and value is added to designation laminate shape
is there any way to fix this.

thanks
Attachments
1.PNG
2.PNG
2.PNG (15.05 KiB) Viewed 2516 times

User avatar
Todd
First Officer Cadet
First Officer Cadet
Posts: 210
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: laminate designation

Unread post by Todd » Tue Jan 21, 2020 2:39 pm

If you use the panel function you should not have this issue. Laminate and edge functions are older and do not work the same as panel
Attachments
PANEL FUNCTION.jpg
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com

valer_y
Private First Class
Private First Class
Posts: 11
Joined: Sat Jun 16, 2018 10:16 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.19

Re: laminate designation

Unread post by valer_y » Sun Feb 02, 2020 9:12 am

hi Tod
I do not use the function panel, in the common there were a lot of errors related to it.
and I solved this problem, changing the name.
thanks
Attachments
LAMINATE.PNG
LAMINATE.PNG (10.09 KiB) Viewed 368 times

RaudMees
Master Chief
Master Chief
Posts: 139
Joined: Wed Dec 30, 2015 11:25 am
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Contact:

Re: laminate designation

Unread post by RaudMees » Sun Feb 02, 2020 7:07 pm

Hi valer_y

It's a bit out of topic, but this is the thing how it's possible to make workaround in TopSolid. For me this is another option what is possible to show in part definition window. I am using there lot of parameters, some samples:
1) extruded part length - Pipe L=[L]mm and in BOM - Pipe L=1829mm
2) component, which is made in driver block - Door [db.z]*[db.x]*[db.y] - BOM = Door 2090x890x92
etc.

Some customers needs some data only in this way. It's possible to mix it in Excel too, but TopSolid can do that too.

RM

Post Reply