Double wrapped driver blocks

Integrated solution for design, manufacturing and management that provides all standard parts and procedures for wood processing.

Moderators: remi77, Daniel, jacs

quazoosl
Master Corporal
Master Corporal
Posts: 47
Joined: Thu Oct 10, 2019 12:41 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.21

Double wrapped driver blocks

Unread post by quazoosl »

In the documentation I have for publications, there is mention of a double wrapped driver block. As far as I understand this is a driver block that has another driverblock inside of it, and that second block is based on an offset from the main driver block sides.

When and why would I want to use a double wrapped driver block?
Last edited by quazoosl on Tue Oct 15, 2019 3:17 pm, edited 1 time in total.
User avatar
Todd
First Officer Cadet
First Officer Cadet
Posts: 222
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: Double wrapped driver blocks

Unread post by Todd »

I like to use this for door and drawer fronts helps to already have the gaps and hinges placed and brining in vertical and horizontal dividers with the assembly screws already in them because we use blind dado constructions this way I don't need to have a driving parameter for the side thickness :idea:
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com
quazoosl
Master Corporal
Master Corporal
Posts: 47
Joined: Thu Oct 10, 2019 12:41 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.21

Re: Double wrapped driver blocks

Unread post by quazoosl »

How does this work if the size of the second block is determined by offsets from the first block? Or are those just for the initial size?
User avatar
Todd
First Officer Cadet
First Officer Cadet
Posts: 222
Joined: Mon Nov 10, 2014 9:28 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.20
Location: Detroit, MI

Re: Double wrapped driver blocks

Unread post by Todd »

the offset value in source file x1 and x2 for example are just place holders when inserted in the assembly where its used it will attach to the next closest parallel face to the first internal driver block automatically
Todd Craig
Great Lakes Woodworking
tcraig@glwdetroit.com
quazoosl
Master Corporal
Master Corporal
Posts: 47
Joined: Thu Oct 10, 2019 12:41 pm
TopSolid Module: TopSolid'Wood
TopSolid Version: 6.21

Re: Double wrapped driver blocks

Unread post by quazoosl »

Copy. Thank you for the clarification.
User avatar
remi77
Administator
Administator
Posts: 312
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Re: Double wrapped driver blocks

Unread post by remi77 »

Hi

Thanks to tag your topic as solved (tick the green check of your first message)

See you

Rémi :wink:
Thanks to use the Image on the best answer when you've got the solution.
Post Reply