Page 1 of 1

Modified

Posted: Wed Jun 20, 2018 2:35 pm
by CAD_73
I'm wondering if I could change the text "Modifed" to an other name, like CNC

When drilling or sawing a part TopSolid creates the tekst (modified) on my material list.

It would be nicer if it would be possible that TopSolid automaticly add's a part type like CNC on the part :D

Re: Modified

Posted: Fri Jun 22, 2018 11:03 pm
by Toddsolid
(modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?

Re: Modified

Posted: Sat Jun 23, 2018 3:11 pm
by CAD_73
Toddsolid wrote: Fri Jun 22, 2018 11:03 pm (modified) typically shows up on parts that were repetition, duplicates, and the resulting parts after a saw operation, and components that have been changed (modified) from there template or parent part. is that what your referring too?
Yes that what I mean.

Re: Modified

Posted: Fri Aug 24, 2018 8:50 am
by RaudMees
Hello

I am in same situation today. Into BOM I can add TopSolid CAM information, but it doesn't work with extruded profiles. For me modified is good enough :)
I remember, some years ago I had that information in BOM, but I don't remember, what I had in BOM to call it out.

Any ideas?

RM

Re: Modified

Posted: Fri Aug 24, 2018 9:23 am
by RaudMees
Maybe TopSolid->Comment will work. Try this. Then You will have (modified), when You use components from library and do some machinings. I changed that(modified) to Yes in top.dic file. Remember, that file will be updated with updates and You may need to make changes again.

RM

Re: Modified

Posted: Fri Nov 23, 2018 8:33 pm
by CAD_73
Works for me :lol: Thanks!