Hello!
Regarding multi-component assembly in TS Wood.
Does anybody know how to adjust the depth of the 5 mm drilling for the threaded connecting bolt? I prefer the one with a 11-12 mm thread. TS standard depth is 8,5 mm...
Best regards,
Christoffer / Exakt
Cams & dowels
Moderators: remi77, jacs, Daniel
-
- Private First Class
- Posts: 13
- Joined: Sun Jan 12, 2014 8:00 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.23
Cams & dowels
- Attachments
-
- hafele.png (5.21 KiB) Viewed 3032 times
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Cams & dowels
depends on the model and how it was done
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Cams & dowels
here some options you can think about without me knowing how you are setup I can only suggest you explore the below:
1.) is it done with a catalog then you need to add to the that
2.) is it a parameter and is it a diver if not make it one
3.) copy the component and change the depth and put it in your library
1.) is it done with a catalog then you need to add to the that
2.) is it a parameter and is it a diver if not make it one
3.) copy the component and change the depth and put it in your library
-
- Private First Class
- Posts: 13
- Joined: Sun Jan 12, 2014 8:00 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.23
Re: Cams & dowels
Sorry if the original question was a bit unclear.
Todd, to begin with, I can't even find the component?
Cheers!
Christoffer.
Todd, to begin with, I can't even find the component?
Cheers!
Christoffer.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Cams & dowels
I'm suggesting if you cant find it make it. its not that complex of a component.
do you have your own library? or are you using ones that came with TopSolid wood.
I would suggest you make your own if you have not already.
do you have your own library? or are you using ones that came with TopSolid wood.
I would suggest you make your own if you have not already.
-
- Private First Class
- Posts: 13
- Joined: Sun Jan 12, 2014 8:00 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.23
Re: Cams & dowels
Hi.
In this case, I'm using the standard minifix TopSolid component. I just can't find it in order to alter it...
C.
In this case, I'm using the standard minifix TopSolid component. I just can't find it in order to alter it...
C.
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: Cams & dowels
check here if it was installed locally
C:\Missler\V616\lib
C:\Missler\V616\lib