groove funtion
Moderators: remi77, jacs, Daniel
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
groove funtion
How would I get a groove around the inside edge of each opening on this door?
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
- Todd
- First Officer Cadet
- Posts: 246
- Joined: Mon Nov 10, 2014 9:28 pm
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.24
- Location: Detroit, MI
Re: groove funtion
trace the edges to groove with the curve function then use the contour as the tool path for the groove function. or there are other methods if you are not using automatic machining to TopSolid wood cam
- jhw3
- Private
- Posts: 7
- Joined: Thu Jan 15, 2015 7:40 am
- TopSolid Module: TopSolid'Wood
- TopSolid Version: 6.15
Re: groove funtion
Thanks Todd!
So easy now
John
So easy now
John
John Wilson
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Skyline Cabinets
Bakersfield, California
TopSolid Wood & Cam
AutoCad 2017
Cabnetware 12
S2M 6
Biesse Rover G 5x12 Flat Table
Weeke ABD 060 Horizontal Boring
Re: groove funtion
Hello
Thanks to tag your topic as "solved" when you've got the solution ,
I've done the job for you this time,
See you
Rémi
Thanks to tag your topic as "solved" when you've got the solution ,
I've done the job for you this time,
See you
Rémi
Thanks to use the on the best answer when you've got the solution.