Toolbar

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, Daniel, jacs

kotlas
Corporal
Corporal
Posts: 21
Joined: Fri Jan 14, 2011 6:53 am

Toolbar

Unread post by kotlas » Tue Feb 15, 2011 7:32 am

Hello
Can I add some function to this list?
Attachments
NP.JPG

User avatar
remi77
Administator
Administator
Posts: 294
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 » Tue Feb 15, 2011 8:09 am

Hi Kotlas,

No, it's impossible to complete this list,

See you,

Rémi :wink:

kotlas
Corporal
Corporal
Posts: 21
Joined: Fri Jan 14, 2011 6:53 am

Unread post by kotlas » Tue Feb 15, 2011 11:03 am

remi77 wrote:Hi Kotlas,

No, it's impossible to complete this list,

See you,

Rémi :wink:
Hi Rémi
I want to read information from the PP (table is from VB6) and putting it in tool list.Is it possible?
Attachments
NP1.JPG

User avatar
remi77
Administator
Administator
Posts: 294
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 » Tue Feb 15, 2011 12:00 pm

Hi,

I'm not sure to have clearly understood, but if you to add your tool list in your block file,
Open your *.ini file.

Go to section [MYDEFINE_PROGRAM,BEGIN]

an add : #bloc = MSG,[DEFINE_LIST,TOOL];

I urge to you to clearly define what you want :wink:

See you

Rémi :wink:

kotlas
Corporal
Corporal
Posts: 21
Joined: Fri Jan 14, 2011 6:53 am

Unread post by kotlas » Tue Feb 15, 2011 12:41 pm

remi77 wrote:Hi,

I'm not sure to have clearly understood, but if you to add your tool list in your block file,
Open your *.ini file.

Go to section [MYDEFINE_PROGRAM,BEGIN]

an add : #bloc = MSG,[DEFINE_LIST,TOOL];

I urge to you to clearly define what you want :wink:

See you

Rémi :wink:
Hi
I want to transfer information from this table to the tool plan
Attachments
NP2.JPG

Post Reply