Trochoidal Machining CLASHES!

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, jacs, Daniel

bernardiann
Private
Private
Posts: 8
Joined: Sun Jan 31, 2010 3:11 pm

Trochoidal Machining CLASHES!

Unread post by bernardiann »

I am having clash on part when using Trochoidal to machine.

Trochoidal radius is set less than the radius of the tool but there is still clash. I have am using the latest update patch! Need help asap.

My tool diameter is 32. My insert has an R of 4.5
stepover is 16.1
loop pitch is 16.1
loop radius is 16.1
Overload ratio set to 100


I am having clashes which I can't be explained.
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hi bernardiann

A new patch has just been realeased (6.11.224). Does it fix your problem?

See you,

Rémi :wink:
bernardiann
Private
Private
Posts: 8
Joined: Sun Jan 31, 2010 3:11 pm

Unread post by bernardiann »

Hello Remi,

I have
CAD v6.11.224.23
CAM v6.11.224.21

I used this version to generate the CAM.

There's clash with trochoidal
User avatar
remi77
Administator
Administator
Posts: 348
Joined: Thu Feb 22, 2007 10:05 am
Contact:

Unread post by remi77 »

Hi ,

Did you reprt that problem to the support?

See you

Rémi :wink:
Post Reply