[Solved] PP for Okuma MX 55 VA / OSP7000M
Posted: Tue Jan 05, 2010 9:07 am
Hello,
I did my best to modify a fanuc post and managed to mill a 3d shape, use drilling cycles etc, but I just can't manage to overcome issues I run into with ARCs.
The machine is unable to calculate ARCs:
TopSolid:
---------------------------------
N4 G0 X-61.502 Y-25.5 M8
N5 G56 H6 Z10. S3000 M3
N6 Z7.
N7 Z2.
N8 G1 Z-.5 F300
N9 G17 G3 X-62.48 Z-.5 I-.489 J.076
Another software generates the code this way:
---------------------------------
N5 G0 X-24.778 Y-61.5 M8
N6 G56 H06 Z5.0 S3000 M3
N7 G1 Z-0.3 F200.0
N8 G17 G3 I-0.722 J0.0 F262.5
Does anyone have an OKUMA valid PP or can anyone see the problem here?
Thanks!
I did my best to modify a fanuc post and managed to mill a 3d shape, use drilling cycles etc, but I just can't manage to overcome issues I run into with ARCs.
The machine is unable to calculate ARCs:
TopSolid:
---------------------------------
N4 G0 X-61.502 Y-25.5 M8
N5 G56 H6 Z10. S3000 M3
N6 Z7.
N7 Z2.
N8 G1 Z-.5 F300
N9 G17 G3 X-62.48 Z-.5 I-.489 J.076
Another software generates the code this way:
---------------------------------
N5 G0 X-24.778 Y-61.5 M8
N6 G56 H06 Z5.0 S3000 M3
N7 G1 Z-0.3 F200.0
N8 G17 G3 I-0.722 J0.0 F262.5
Does anyone have an OKUMA valid PP or can anyone see the problem here?
Thanks!