[Solved] ISO process

CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...

Moderators: remi77, Daniel, jacs

User avatar
digital
Master Corporal
Master Corporal
Posts: 35
Joined: Wed Feb 21, 2007 9:03 pm
Contact:

[Solved] ISO process

Unread post by digital » Thu Oct 25, 2007 12:11 pm

When is ISO process going to start working again? x64 version killed this function so we have to manually launch the PP and find .cam file and create the nc code...


---------------------------
Error
---------------------------
You are using a 64 bits version of TopSolid'Cam. That function must start from an external application
---------------------------
OK
---------------------------


Is this such a huge deal to be fixed? I would love to meet the brain who decided to kill this function...

corne

Unread post by corne » Fri Oct 26, 2007 1:30 pm

the only thing i know is that 64bit TopSolid'Cam is still full of bugs
we had to go back to 32bit to work well.
i hope that the people of top will work about this.

corne

Unread post by corne » Fri Nov 09, 2007 12:49 pm

i think that the people of TopSolid do not read this forum

User avatar
TopSolid2007
Master Chief
Master Chief
Posts: 133
Joined: Thu May 10, 2007 4:28 pm
Location: São Bernardo do Campo - SP
Contact:

Unread post by TopSolid2007 » Mon Nov 12, 2007 2:24 am

So do I. I also think that anyone from Missler are rading or giving the real importance to this forum...

User avatar
D@vid
Administator
Administator
Posts: 69
Joined: Mon Feb 19, 2007 10:29 pm
TopSolid Module: TopSolid'Design
TopSolid Version: 7.13
Location: Nantes, France
Contact:

Unread post by D@vid » Mon Nov 12, 2007 10:23 am

Hi Guys,

This is not true. Some people from Missler Software reads regularly the forum, and it's not because you have no answer from them that it is useless for the product.
I advise you to Keep using the forum, this will have a positive impact on the TopSolid development.

Rgds
D@vid

TopSolid'Forum Administrator

corne

Unread post by corne » Mon Nov 12, 2007 1:46 pm

hi D@vid

but are the people working on this problem?
we do not hear annything about this?
is was nice to hear if they were saying sonething of "in the next pacth it will be fix" but even that you wil not hear.
so some feedback is nice.

User avatar
Trusty
Private
Private
Posts: 9
Joined: Wed Jun 20, 2007 3:39 pm

Unread post by Trusty » Tue Nov 20, 2007 5:38 pm

There is a big incompatibility between 64 bits and post processors. They are developped with VB6, an old style language. All applications built with this language are impossible to launch from 64 bits applications. And redevelop all would cost a lot.

There is no plans today to do what you need. Sorry.

PS : i also read the forum sometimes, and i push some answers when i can help...

Post Reply