CADCAM machining solution: mill-turn centers, milling and turning, kinematics, fixtures, topology recognition, tool library, manufacturing schedules, realistic simulation, workshop sheets, post-processors and DNC...
Moderators: remi77, jacs, Daniel
-
Top'Noob
- First Officer Cadet
- Posts: 245
- Joined: Fri Jun 15, 2007 3:05 pm
Unread post
by Top'Noob »
Has anybody sucessfully changed the default editor in the config ?
Original said : U_EDITOR "notepad.exe"
I tried this: U_EDITOR "uedit32.exe"
and this... U_EDITOR "C:\Program Files\UltraEdit-32\uedit32.exe"
No luck so far...
-
TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
-
Contact:
Unread post
by TopSolid2007 »
If you want to change your default editor. You can do as follow
Open the file: C:\Missler\PP\TopPpExec.var
Change the information about the default editor
E.G.
[BLOC]
#Editor = C:\CIMCO\CIMCOEdit5\CIMCOEdit.exe
It works fine for me when I make ISO/NC Files
-
Top'Noob
- First Officer Cadet
- Posts: 245
- Joined: Fri Jun 15, 2007 3:05 pm
Unread post
by Top'Noob »
Thanks, I'll try that tomorrow.
-
Top'Noob
- First Officer Cadet
- Posts: 245
- Joined: Fri Jun 15, 2007 3:05 pm
Unread post
by Top'Noob »
That works perfect !
I had to change TopPpExec.
par not TopPpExec.
var
-
TopSolid2007
- Master Chief
- Posts: 133
- Joined: Thu May 10, 2007 4:28 pm
- Location: São Bernardo do Campo - SP
-
Contact:
Unread post
by TopSolid2007 »
You are right...
I did a confusion between the extensions...