[Solved]Split Invalid Core & Cavity Block Dimensions

CAD solution for mold making: slider design, guide rails, jacks,
mold base, components and process, coolant circuit, control via mold levels, creation of drawings, parts lists...

Moderators: remi77, Daniel, jacs

Posts: 4
Joined: Fri Jan 04, 2008 1:37 am
TopSolid Module: TopSolid'Design
TopSolid Version: 7.10
Location: Plymouth, Indiana

[Solved]Split Invalid Core & Cavity Block Dimensions

Unread post by Mark » Tue May 05, 2009 2:45 am

I'm trying to spit a part and keep geting "Invalid Core and Cavity Block Dimensions. Can anybody give me any direction.


User avatar
Posts: 68
Joined: Fri Feb 23, 2007 2:07 pm
Location: Montreal

Unread post by RICHARD LALONDE » Tue May 05, 2009 1:08 pm

Could you more explicit
have you validate everything inside the spliting as
Part good for split
Parting line good for the split
Parting surface good for splitting, no hole detected
Is it one cavity mold or more could you had a picture.
That happen to me sometime but it's not the soft it's cause by human error.

User avatar
Volunteer Cadet
Volunteer Cadet
Posts: 184
Joined: Thu Mar 01, 2007 11:42 am
Location: Leiria

Unread post by olaio » Tue May 05, 2009 4:06 pm

Hi Mark

Check if the ucs that you select to be the origin of the bloc's creation, is "inside" the part.
This ucs can be "outside" the part in X and Y axis, BUT in Z axes it needs to be "inside" the part to be able to create the blocks. After the blocks creation you can modify the blocks dimensions, and after modify the ucs Z position.

This can be one of the problems, but as Richard told you, you need to check all the other possibilities.



Post Reply