TopSolid'Forum

Jehronimo,
I tried that and it failed again once I switched it back. Do you have to change the high quality threading to switch it back?


Larry M.

Hi guys, I didn't involve with this discussions before because I'm still with the 2007 V68-248 because after that they got probleme with the tapping process of the Jiffy-Plug. I have to switch to the 2008 soon, but I was scare a little bit with everything I read about the mold module V6.9. I know TS still have the probleme with the tapping process of the jiffy plug but that should not affect the section.

My question is to made a full section of the mold in your draft , when you are in the drafting module do you use drafting section or mold section ? bcs mold section is the only choice to made what you want, some people don't know that.
Because I ask my VAR to made a test for me with the V6.9-216 and the full section work and also with the JP-352 without probleme, the only things who don't work again is the tapping process who SHOULD be fix in the 220. When this one will be available for use I will switch to 2008

I use the Mold "Full Section". I'll use the regular "Full section" if I just want to cut through the "A" or "B" side only. But yes all the tappings are not working on any of the water componets that I use. Plugs, baffles, connectors.

Larry M. wrote:Jehronimo,
I tried that and it failed again once I switched it back. Do you have to change the high quality threading to switch it back?

Yes I do. I deactivate this option to get the JP352 in my mold design.

Jehronimo

Hi all!

It seems that the problem with the JP352 nipples was resolved in the 220 patch. I am sorry I did not report this sooner to you. (as we are on patch 232 now).(which by the way...it works there too!).

Just wanted to pass this along.