SHCS & FHCS screws

CAD solution for mold making: slider design, guide rails, jacks,
mold base, components and process, coolant circuit, control via mold levels, creation of drawings, parts lists...

Moderators: remi77, jacs, Daniel

User avatar
jehronimo
Major
Major
Posts: 149
Joined: Thu Mar 01, 2007 1:05 pm

SHCS & FHCS screws

Unread post by jehronimo »

Hi,

Directly from the Quality dept, a very good news : Those 2 types of screw will be added to the Predefine_Inch and Predefine TopSolid'Mold libraries from the patch 6.8.256 :shock:

Enjoy :wink:

Jehronimo
User avatar
RICHARD LALONDE
Sergeant
Sergeant
Posts: 68
Joined: Fri Feb 23, 2007 2:07 pm
Location: Montreal
Contact:

All

Unread post by RICHARD LALONDE »

I hpoe they will do the job correctly that is mean
from small as 4-40 to 1.00 or bigger with NC or NF.
Because often they made this improvement but half way, that is mean they do it but not complete.

We could just wish
User avatar
jehronimo
Major
Major
Posts: 149
Joined: Thu Mar 01, 2007 1:05 pm

Unread post by jehronimo »

Hi,

The first code available in Predefine Inch is 0-80x1/4 for SHCs, and 0-80x1/8 for FHCs...I do not use a lot Inch std, is it OK for you :D ??

Jehronimo
Post Reply